cracking_wpa
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
cracking_wpa [2010/03/07 16:10] – forgot to update the version and date mister_x | cracking_wpa [2022/01/02 21:34] (current) – Fixed dead links mister_x | ||
---|---|---|---|
Line 5: | Line 5: | ||
===== Introduction ===== | ===== Introduction ===== | ||
- | This tutorial walks you through cracking WPA/WPA2 networks which use pre-shared keys. I recommend you do some background reading to better understand what WPA/WPA2 is. The [[http:// | + | This tutorial walks you through cracking WPA/WPA2 networks which use pre-shared keys. I recommend you do some background reading to better understand what WPA/WPA2 is. The [[http:// |
WPA/WPA2 supports many types of authentication beyond pre-shared keys. [[aircrack-ng]] can ONLY crack pre-shared keys. So make sure [[airodump-ng]] shows the network as having the authentication type of PSK, otherwise, don't bother trying to crack it. | WPA/WPA2 supports many types of authentication beyond pre-shared keys. [[aircrack-ng]] can ONLY crack pre-shared keys. So make sure [[airodump-ng]] shows the network as having the authentication type of PSK, otherwise, don't bother trying to crack it. | ||
Line 21: | Line 21: | ||
It is recommended that you experiment with your home wireless access point to get familiar with these ideas and techniques. If you do not own a particular access point, please remember to get permission from the owner prior to playing with it. | It is recommended that you experiment with your home wireless access point to get familiar with these ideas and techniques. If you do not own a particular access point, please remember to get permission from the owner prior to playing with it. | ||
- | |||
- | I would like to acknowledge and thank the [[http:// | ||
Please send me any constructive feedback, positive or negative. Additional troubleshooting ideas and tips are especially welcome. | Please send me any constructive feedback, positive or negative. Additional troubleshooting ideas and tips are especially welcome. | ||
Line 147: | Line 145: | ||
In the response above, you can see that ath0 is in monitor mode, on the 2.452GHz frequency which is channel 9 and the Access Point shows the MAC address of your wireless card. Only the madwifi-ng drivers show the card MAC address in the AP field, other drivers do not. So everything is good. It is important to confirm all this information prior to proceeding, otherwise the following steps will not work properly. | In the response above, you can see that ath0 is in monitor mode, on the 2.452GHz frequency which is channel 9 and the Access Point shows the MAC address of your wireless card. Only the madwifi-ng drivers show the card MAC address in the AP field, other drivers do not. So everything is good. It is important to confirm all this information prior to proceeding, otherwise the following steps will not work properly. | ||
- | To match the frequency to the channel, check out: | + | To match the frequency to the channel, check out: http://www.cisco.com/en/US/ |
- | http://www.rflinx.com/help/calculations/# | + | |
=== Step 1b - Setting up mac80211 drivers === | === Step 1b - Setting up mac80211 drivers === |
cracking_wpa.txt · Last modified: 2022/01/02 21:34 by mister_x