Differences

This shows you the differences between two versions of the page.

--- packetforge-ng [2008/01/01 17:26] – added troubleshooting for "Mode already specified" error. darkaudax
+++ packetforge-ng [2010/08/22 20:59] (current) – update "Usage" and fixed "mode" rendering mister_x
@@ Line 10: / Line 10: @@
 Usage: packetforge-ng <mode> <options>
-====Forge options:====
+====Forge options====
       *-p <fctrl>     : set frame control word (hex)
@@ Line 24: / Line 24: @@
       *-w <file>      : write packet to this pcap file
-====Source options:====
+====Source options====
       *-r <file>      : read packet from this raw file
       *-y <file>      : read PRGA from this file
-====Modes (long modes use double dashes):====
+====Modes ====
-      *--arp          : forge an ARP packet    (-0)
+      *-''''-arp          : forge an ARP packet    (-0)
-      *--udp          : forge an UDP packet    (-1)
+      *-''''-udp          : forge an UDP packet    (-1)
-      *--icmp         : forge an ICMP packet   (-2)
+      *-''''-icmp         : forge an ICMP packet   (-2)
-      *--null         : build a null packet (-3)
+      *-''''-null         : build a null packet (-3)
-      *--custom       : build a custom packet  (-9)
+      *-''''-custom       : build a custom packet  (-9)
@@ Line 121: / Line 121: @@
 ==== Generating a custom packet ====
-If you want to generate a customer packet, first create a packet with the tool of your choice.  This could a specialized tool, a hex editor or even from a previous capture.  Then save it as a pcap file.  Following this, run the command:
+If you want to generate a customer packet, first create a packet with the tool of your choice.  This could be a specialized tool, a hex editor or even from a previous capture.  Then save it as a pcap file.  Following this, run the command:
    packetforge-ng -9 -r input.cap -y keystream.xor -w output.cap
@@ Line 132: / Line 132: @@
 When it runs, packetforge-ng will ask you which packet to use and then output the file.
@@ Line 139: / Line 140: @@
 So the packetforge-ng command becomes:
-   packetforge-ng -0 -a 00:14:6C:7E:40:80 -h 00:0F:B5:AB:CB:9D -k 192.168.1.100 -l 192.168.1.1 -y fragment-0124-161129.xor -w arp-request
+   packetforge-ng -0 -a 00:14:6C:7E:40:80 -h 00:0F:B5:AB:CB:9D -k 255.255.255.255 -l 255.255.255.255 -y fragment-0124-161129.xor -w arp-request
@@ Line 160: / Line 161: @@
    "packetforge-ng --help" for help.
-This because -1 was used instead of the correct -l.  So simply use "-l".
+This because -1 (number one) was used instead of the correct -l (the letter ell).  So simply use "-l".